Motorola APX 1000 - Figure 8-41. Attaching the Antenna; Figure 8-42. Assemble the Vacuum Port Seal; Figure 8-43. Assemble the Ventilation Label

8-28 Disassembly/Reassembly Procedures: Radio Reassembly
8.6.10 Reassemble the Antenna (23)
1. With the radio turned off, turn the antenna clockwise to attach it to the radio.
Figure 8-41. Attaching the Antenna
8.6.11 Reassemble the Vacuum Port Seal (43), Ventilation Label (44) and Bottom
Label (17)
1. Adhere and gently press the Vacuum Port Seal (43) on the chassis’ recess as shown in
Figure 8-42. Press the Vacuum Port Seal (43) for 30 seconds.
Figure 8-42. Assemble the Vacuum Port Seal
2. With the Vacuum Port Seal assembled, adhere the Ventilation Label (44) on the chassis’
recess as shown in Figure 8-44. Press the Ventilation Label (Port Seal area) (44) for 10
seconds.
Figure 8-43. Assemble the Ventilation Label