Motorola APX 1000 - Figure 8-44. Assemble the Bottom Label; Figure 8-45. Attaching Battery - Slide into Position

Disassembly/Reassembly Procedures: Radio Reassembly 8-29
3. Adhere the Bottom Label (17) on the recess at the bottom of the Front Housing as shown in
Figure 8-44.
Figure 8-44. Assemble the Bottom Label
8.6.12 Reassemble the Battery (48)
1. With the radio turned off, slide up the battery into the radio’s frame until the bottom latch clicks
into place as shown in Figure 8-45.
Figure 8-45. Attaching Battery – Slide into Position