Radio Alignment Procedures: Performance Testing 6-13
• BER Integration Time:
BER Integration Time carries with Test Pattern Type.
• Number of Frames
Number of Frames over which bit error result are accumulated to produce the result.
NOTE: When Continuous Operation = Yes, all fields will be grayed out while the test is in progress.
They will be enabled when the STOP button is pressed.
When Continuous Operation = No, a wait cursor will be displayed while the test is in
progress and return to normal when the test is done.
3. Press Start/Stop button to begin or end BER testing.
Figure 6-10. Bit Error Rate Screen (900 MHz)
To Next Page
Loading...
