21
English
GETTING STARTED
ADJUST THE VOLUME
Turn the ON/OFF/Volume Control knob
clockwise to increase the volume, or
counterclockwise to decrease the volume.
–or–
Note: Your dealer can preprogram one of the
programmable buttons to Volume Set.
SELECT AN LTR CHANNEL/
TALKGROUP
Your CP200XLS display radio can be
programmed with up to 10 LTR sites and a
maximum of 100 talkgroups, in total, across
one or more sites (up to a total of 10 sites).
To select an LTR Channel/Talkgroup:
Note: Site/talkgroup settings are programmed
by your dealer.
1 Hold down the Volume Set button (see
page 16).
• You will hear a continuous tone.
2 Turn the ON/OFF/Volume knob to the desired
volume level.
3 Release the Volume Set button.
1
Turn the Channel Selector knob to select
the appropriate LTR channel/talkgroup.
–or–
L or M to select the appropriate LTR
channel/talkgroup.
–or–
Press any of the programmable buttons to
access a preprogrammed talkgroup. Then
use either the Channel Selector knob or
L and M to select the appropriate LTR
channel/talkgroup.
Note: The third option is available only if
your radio has been programmed
with a specified LTR channel/
talkgroup.
To Next Page
Loading...
