38
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through a repeater (depending
on phone line availability). You can edit the
phone list through your radio’s menu (see
page 40).
The phone feature is available in both
conventional and LTR systems.
• D appears on the display when you are in
Phone mode.
ACCESS THE REPEATER
Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access/deaccess code to the repeater.
Immediate Auto – your radio will transmit the
access/deaccess code automatically upon
entering phone mode or disconnecting a
phone call. You will hear a series of tones, and
see your access/deaccess code on the display,
indicating that an access/deaccess code is
being sent automatically.
Delayed Auto – your radio will transmit the
access code upon a PTT button press. The
deaccess code is sent automatically when you
exit phone mode.
Manual – Enter your access/deaccess code
using the DTMF keypad (Full Keypad Model
only).
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button (see
page 18), and skip to step 6.
– or –
1 Select a channel/talkgroup that has been
programmed for telephone.
2
J to enter menu mode.
3 L or Muntil
4 J to select
Note: The D appears on the display.
PHONE
PHONE
To Next Page
Loading...
