Motorola CP200XLS - Receive a Call Alert Page F (Conventional Operation Only); Send a Call Alert Page (Conventional Operation Only)

30
English
RADIO CALLS
RECEIVE A CALL ALERT™ PAGE F
(CONVENTIONAL OPERATION ONLY)
When you receive a Call Alert page:
• The display shows F and the preprogrammed
name or ID of the calling radio.
• The LED indicator blinks yellow, if programmed
by your dealer/programmer.
• You hear four high-pitched tones.
To acknowledge the page, press and release
the PTT button; to cancel the page, press any
other key.
SEND A CALL ALERT PAGE
(CONVENTIONAL OPERATION ONLY)
You can alert another person by sending a Call
Alert page.
Press the preprogrammed Radio Call button
(see page 17) and proceed to step 4.
–
or –
1 J to enter menu mode
2 L or M until
3 J to select
4 L or M until
5 J to select
6 L or M to locate the desired ID in the
Radio Call List.
- or -
Enter a valid DTMF digit (0 – 9) to move to that
location in the list (Full Keypad Model only).
7 Press the PTT button to send the call.
8 Press and hold the PTT button to talk; release
to listen.
9 When the call is completed,
K until you exit menu mode.
RAD CALL
RAD CALL
SEL CALL
SEL CALL