Motorola CP200XLS - Escalert Functionality; Escalert Volume Adjustment

47
English
TONE PREFERENCES
Note: Seven alert tones are available to select from
in the list.
ESCALERT
(CONVENTIONAL OPERATION ONLY)
You can program your radio to increase the
volume of the alarm tones when a radio call is
not answered.
Press the preprogrammed Escalert button
(see page 18) and proceed to step 5.
– or –
1 J to enter menu mode.
2 L or M until
3 J to select
4 L or M until
5 J to select
6 L or M until
– or – until
7 J to select the desired setting.
8 L or M until you see and hear the tone
you want to use for this type of call.
9 J to select the desired setting.
10 you see:
11 K to return to
12 K until you exit the menu mode.
TONES
TONES
TONE TAG
TONE TAG
CALL ALT
SEL CALL
TONE SET
TONE TAG
1 J to enter menu mode.
2 L or M until
3 J to select
4 L or M until
5 J to select
6 L or M until
or until
7 J to select the desired setting.
TONES
TONES
ESCALERT
ESCALERT
ON
OFF