24
English
GETTING STARTED
TRANSMIT A CONVENTIONAL
CALL
CALL LIGHT
(TRUNKED OPERATION ONLY)
The Call Light indicator informs you that you
have received a call from a specified LTR
®
talkgroup (as programmed by your dealer).
The yellow LED indicator will blink
continuously, indicating that a call has been
received.
To turn the call light OFF:
• turn the radio OFF, then ON again, or
• change the channel/talkgroup, or
• press the PTT button, or
• press any valid button.
REPEATER OR TALKAROUND J
MODE
Talkaround Mode enables you to communicate
with another radio when either:
• The repeater is not operating.
–or–
• Your radio is out of the repeater’s range but
within communicating distance of another radio.
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
Note: Monitor for traffic before transmitting to
ensure that you do not “talk over”
someone who is already transmitting
3 Hold the radio vertically 1 to 2 inches (2.5 to
5cm) from your mouth. Press the PTT button
to talk.
• The LED indicator lights steady red while
the call is being sent.
4 Release the PTT to listen.
To Next Page
Loading...
