54
Specific
– the MTP850 Ex/MTP810 Ex will use only the
gateway with the specified Gateway address for that
talkgroup.
Upon selecting “Specific”, you will see one of the following
displays:
• The selected gateway address (e.g.:
1022), pre-programmed by your Serv-
ice Provider.
• “None”, indicating that no gateway was
selected for that talkgroup.
When the MTP850 Ex/MTP810 Ex detects
the suitable gateway, the Gateway icon will
turn solid.
Selecting DMO Group Call via Repeater
While in DMO, proceed as follows to choose the Repeater
option to set up a call via Repeater for the selected talkgroup:
1.
Press Optns, use the navigation keys to scroll to Config
and press Select.
2.
Scroll to Repeater and press Select.
3.
The MTP850 Ex/MTP810 Ex will use the
first available repeater for that talkgroup.
The repeater icon will flash upon selecting
that option.
DMO Folder 1
Police
Hello
Optns Contcs
DMO Folder 1
Police
Hello
Optns Contcs
To Next Page
Loading...
