11 - 32 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Move Cursor
Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the Alphanumeric Keyboard on page 11-93.
Move Cursor to Last
Occurrence of String and
Replace All
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan
Move Cursor to Last Occurrence of String and
Replace All
, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Alphanumeric
Keyboard
. Scan the
End of Message bar code on page 11-102
. Enter
another alphanumeric string representing the character(s) (up to 10) to
insert using the
Alphanumeric Keyboard
. Scan
End of Message
.
11-33
Skip to End
Scan
Skip to End
to move cursor to the end of the data. 11-33
Skip Ahead “N” Characters
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
11-34
Skip Back “N” Characters
Scan one of these bar codes to select the number of positions back to
move the cursor.
11-35
Send Preset Value
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Table 8-4 on page 8-21
.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
11-35
Table 11-2
Setup Field(s) Definitions (Continued)
Parameter Description Page
NOTE If there is no match and the rule fails, the next rule is checked.
Move Cursor To Character
Move Cursor To Start
To Next Page
Loading...
