Motorola SYMBOL DS6707 - Page 368

A - 2 Symbol DS6707 Digital Imager Scanner Product Reference Guide
DP Illumination F1h, 3Bh Auto 4-17
Decode Aiming Pattern F0h, 32h Enable 4-18
Fuzzy 1D Processing F1h, 02h Enable 4-18
Decode Mirror Images F1h, 19h Never 4-19
Miscellaneous Scanner Options
Transmit Code ID Character 2Dh None 4-20
Prefix Value 63h, 69h 7013 <CR><LF> 4-21
Suffix 1 Value
Suffix 2 Value
62h, 68h
64h, 6Ah
7013 <CR><LF> 4-21
Scan Data Transmission Format EBh Data as is 4-22
FN1 Substitution Values 67h, 6Dh Set 4-23
Transmit “No Read” Message 5Eh Disable 4-24
Imaging Preferences
Operational Modes N/A N/A 6-4
Low Light Enhancement F1h 64h Disable 6-5
Presentation Mode Field of View F1h 61h Default (Reduced) 6-5
Image Capture Autoexposure F0h 68h Enable 6-6
Image Capture Illumination F0h 69h Enable 6-6
Illumination Bank Control F1h 3Bh Full 6-7
Fixed Exposure F4h, F1h,
37h
100 6-8
Fixed Gain F1h 38h 50 6-8
Gain Exposure Priority for Snapshot Mode F1h 32h Autodetect 6-9
Snapshot Mode Timeout F0h 43h 0 (30 seconds) 6-10
Snapshot Aiming Pattern F0h 2Ch Enable 6-10
Image Cropping F0h 2Dh Disable 6-11
Crop to Pixel Addresses F4h F0h 3Bh;
F4h F0h 3Ch;
F4h F0h 3Dh;
F4h F0h 3Eh
0 top, 0 left, 1023 bottom,
1279 right
6-12
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.