Motorola SYMBOL DS6707 - Page 375

Standard Default Parameters A - 9
Composite
Composite CC-C F0h 55h Disable 10-74
Composite CC-A/B F0h 56h Disable 10-74
Composite TLC-39 F0h 73h Disable 10-75
UPC Composite Mode F0h 58h Always Linked 10-76
Composite Beep Mode F0h 8Eh Beep As Each Code Type is
Decoded
10-77
GS1-128 Emulation Mode for UCC/EAN
Composite Codes
F0h ABh Disable 10-77
2D Symbologies
PDF417 0Fh Enable 10-78
MicroPDF417 E3h Disable 10-78
Code 128 Emulation 7Bh Disable 10-79
Data Matrix F0h 24h Enable 10-80
Data Matrix Inverse F1h 4Ch
SR, DC: Regular
DP, HD: Autodetect
10-81
Maxicode F0h 26h Enable 10-82
QR Code F0h 25h Enable 10-82
QR Inverse F1h 4Bh
SR, DC: Regular
DP, HD: Autodetect
10-83
MicroQR F1h 3Dh Enable 10-84
Aztec F1h 3Eh Enable 10-84
Aztec Inverse F1h 4Dh
SR, DC: Regular
DP, HD: Autodetect
10-85
Symbology-Specific Security Levels
Redundancy Level 4Eh 1 10-86
Security Level 4Dh 1 10-88
Intercharacter Gap Size F0h 7Dh Normal 10-89
Report Version 10-89
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.