8
DMO Gateway
Indicates that you selected to work with a gateway.
This icon has three states:
Solid — while the terminal is synchronised with the
gateway (i.e., when the terminal receives a valid
presence signal).
Blinking — while the terminal is not synchronised with
the gateway or during attachment.
No icon — during a terminal to terminal and repeater
call.
DMO Repeater
Displayed when the repeater option in DMO is
selected. This icon has three states:
Solid — while the terminal has detected the repeater
(i.e., when the terminal receives a presence signal).
Blinking — while the terminal has not detected the
repeater or during attachment.
No icon — during a terminal to terminal and gateway
call.
Unread Message
Indicates that you have unread message in your Inbox.
New Message Received
Your Inbox could not open automatically due to an on-
going activity. The icon remains displayed to remind
you of new messages in your Inbox.
External Alarm
Displayed when External Alarm (“Horn & Lights”) is
enabled.
Incoming Private Call
Blinks to indicate an incoming Private Call. The icon
extinguishes if you accept or reject the incoming call or
if the call setup fails.
Phone Call
Blinks when a Phone Call is received.
Emergency
Appears while the MTM800 is in Emergency mode.
The icon blinks to indicate an incoming Emergency
Group Call.
Priority Scan (with Priority Monitor Dot)
Indicates scanning is activated.
Icon Description
6815321H01_KOR.book Page 8 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
