106
2. Press
Optns and scroll to your selection:
• Scroll to
Send and press Ok.
• If set up by your Service Provider
you have the option to send the
message to a private number or a
talkgroup.
• Otherwise select the mail recipient of your choice by
scrolling through the address list (see page 76) or
enter the address directly.
Press Send or PTT or to send the message. The
display will show one of the following delivery reports:
Message Delivered — to indicate that the message was
successfully sent and received.
Message Failed — the message was not received.
• Scroll to
Store and press Ok to add
your message to the Template List
(the number assigned to the
message is the lowest free number –
in this case template number 3).
Sending, Editing, and Erasing a User Defined Template
The user defined mail templates are received, new, sent, or
programmed messages that are stored in the Templates List
and may be re-stored for sending.
1. Scroll to
2 Templates and press Ok. The first template in the
Template List is displayed.
If provisioned by your Service Provider, it may be possible to
compose and send text messages from a busy talkgroup. The
group audio will be suspended when a new message or
template is being edited. During this time it is possible to
receive a new emergency call and message editing will be
aborted. If a new private/telephone call is received the message
will be restored after that call completes.
It is possible that the templates numbers are not consecutive.
This is a
Clear Optns
new message
edited
1Private
Back
Ok
2Group
Stored In
Template 3
6815321H01_KOR.book Page 106 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
