31
TMO Group Call
Using the Navigation Key
Your Service Provider configures the
MTM800 to display only selectable
talkgroups. Press the navigation key to
scroll to the required talkgroup and press
Ok. For talkgroup range scrolling configuration, see note in
“Selecting a Range” below.
Using Alphabetical Search
1. In Group Mode, press
Optns.
2. Select
abc for talkgroup alpha search.
3. You are now at the talkgroup alpha
search screen. Enter an alphanumeric
digit, and the MTM800 starts searching
for the first Talkgroup alias, that starts
with that character. Use the navigation key to scroll to
adjacent aliases. In this example “a” is entered.
4. Select the desired talkgroup by pressing
Ok, or press PTT to select and start a call
on the new group.
Using the Numeric Keypad
When the terminal is in group mode and not transmitting (i.e.,
idle or receiving a call), you can dial a group by entering its
speed number via the keypad. This feature is called
Talkgroup Speed Dialling. The speed number is pre-
configured in the terminal.
You can also view a speed number attributed to a group, if it
exists.
Cancl
Ok
Talkgroup 2
Range 10
Status
Optns
Talkgroup 1
Range 10
Back
Ok
2 Range
1 abc
3 Scanning
Back
abc: Group
Cancl
Ok
A = A team
3500
6815321H01_KOR.book Page 31 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
