54
Receiving a Private Call in TMO
1. The MTM800 automatically switches to 
Private mode and starts ringing. The dis-
play shows the caller’s identity.
2. To answer the incoming call, press PTT.
3. To end or cancel the call, press  . The display returns 
automatically to the mode it was before the incoming call 
arrived. 
If the called person ends the call, the 
Call Ended message is 
displayed. 
Receiving a Private Full-Duplex Call in TMO
1. The MTM800 automatically switches to 
Private Mode and starts ringing. The 
display shows the caller’s identity.
2. To answer the incoming call, press 
 or any key on the keypad (if configured by your 
dealer).
3. To end or cancel the call, press  . The display returns 
automatically to the mode it was in before the incoming call 
arrived.
If the called person ends the call, the 
Call Ended message is 
displayed. 
For call alert, see settings in the Tones menu option (page 88).
For call alert, see settings in the Tones menu option (page 88).
Prvt Call
ID: 82114
Prvt Call
ID: 82114
6815321H01_KOR.book  Page 54  Thursday, November 13, 2008  8:06 AM