48
play the following screen, informing you that the call will
be setup without repeater. The Repeater icon will disap-
pear.
• If you press
PTT while the repeater is available, you will
start a DMO call with repeater. The Repeater icon will
be solid.
Making a DMO Group Call via Gateway and Repeater
1. While in DMO, choose the Gateway and Repeater option as
described in “Selecting DMO Group Call via Gateway and
Repeater” on page 45.
2. Place the call for the selected talkgroup:
• If you press PTT while both gateway and repeater are
not available, you will start a DMO call without gateway
and repeater. The Gateway and Repeater icons will dis-
appear.
• If you press PTT while both gateway and repeater are
available, but the call is rejected by the gateway, a
repeater call will be attempted.
> If it is successful your MTM800 will display the mes-
sage Repeater Call and a call via repeater will pro-
ceed. The Gateway icon will disappear.
> If it is not successful your MTM800 will display the
message MS – MS Call and a terminal to terminal
call will proceed. The Gateway and Repeater icons
will disappear.
• If you press PTT while both gateway and repeater are
available, a gateway call will be attempted.
> If it is successful your MTM800 will start a DMO call
with gateway. The Gateway icon will be solid. The
Repeater icon will disappear.
> If synchronising with a gateway is not successful a
repeater call will be attempted.
> If it is successful your MTM800 will display the mes-
sage Repeater Call and a repeater call will proceed.
6815321H01_KOR.book Page 48 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
