Using Bluetooth 6 - 17
Bonding with Discovered Device(s)
A bond is a relationship created between the wearable terminal and another Bluetooth device in order to exchange
information in a secure manner. Creating a bond involves entering the same PIN on the two devices to bond. Once
a bond is created, and the Bluetooth radios are turned on, the devices recognize the bond and are able to
exchange information without re-entering a PIN.
To bond with a discovered Bluetooth device:
1. Press ALT - B. Use the navigation keys to select Show BTExplorer. The BTExplorer window appears.
2. Press ALT - F to open the File menu.
3. Use the navigation keys to select New Connection and press ENTER. The New Connection Wizard window
appears.
Figure 6-22
New Connection Wizard Window
4. Use the navigation keys to select Pair with Remote Device.
5. Press ENTER. The BTExplorer searches for Bluetooth devices in the area and displays the devices in the
Select Remote Device window.
Figure 6-23
Select Remote Device Window
NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite
connections have been created, the New Connection Wizard screen displays.
NOTE Devices discovered previously are listed to save time. To start a new device discovery, press Menu select
Discover Devices from the menu and press ENTER.
To Next Page
Loading...
