5 - 12 WT4070/90 Wearable Terminal Integrator Guide
Figure 5-11
Browse Server Certificates
a. Navigate to the folder where the certificate is stored. Select the certificate filename and then select ok.
3. A confirmation dialog verifies the installation. If the information in this dialog is correct, select the Yes button, If
the information in this dialog is not correct select the
No button. The wizard returns to the Installed Server Certs
dialog box.
Figure 5-12
Confirmation Dialog Box
Credential Cache Options
If you selected any of the password-based authentication types, you can select different credential caching options.
These options specify when the network credential prompts appear: at connection, on each resume, or at a
specified time.
Entering the credentials directly into the profile permanently caches the credentials. In this case, the wearable
terminal does not require user login. If a profile does not contain credentials entered through the configuration
editor, you must log in to the wearable terminal before connecting.
Caching options only apply on credentials entered through the login dialog box.
Figure 5-13
Prompt for Login at Dialog Box
If the wearable terminal does not have the credentials, you are prompted to enter a username and password. If the
wearable terminal has the credentials (previous entered via a login dialog box), it uses these credentials unless the
To Next Page
Loading...
