Motorola WT4070 - Current Profile Window; Ipv4 Status Window

Wireless Applications 5 - 27
Current Profile Window
The Current Profile window displays basic information about the current profile and connection settings. This
window updates every two seconds.
To open the
Current Profile window, press 2.
Figure 5-35 Current Profile Window
IPv4 Status Window
The IPv4 Status window displays the current IP address, subnet, and other IP related information assigned to the
wearable terminal. It also allows renewing the address if the profile is using DHCP to obtain the IP information.
Select
Renew to initiate a full DHCP discover. The IPv4 Status window updates automatically when the IP address
changes.
Association Count Displays the number of APs the wearable terminal connects to while roaming.
AP MAC Address Displays the MAC address of the AP to which the wearable terminal is connected.
Transmit Rate Displays the current rate of the data transmission.
Table 5-19 Signal Strength Status (Continued)
Field Description
Table 5-20 Current Profile Window
Field Description
Profile Name Displays the current profile name the wearable terminal uses to communicate
with the AP.
ESSID Displays the current profile ESSID name.
Mode Displays the current profile mode, either Infrastructure or Ad-Hoc.
Authentication Displays the current profile’s authentication type.
Encryption Displays the current profile’s encryption type.
Channel Displays the current profile’s channel setting.
Country Displays the current profile’s country setting.
Transmit Power Displays the radio transmission power level.