Motorola WT4070 - Wireless Status Application; Signal Strength Window

Wireless Applications 5 - 25
If required, change the name in the Name field and select Save. A confirmation dialog box appears after the export
completes.
Wireless Status Application
To open the Wireless Status window, press ALT - w, select Wireless Status and press ENTER. The Wireless Status
window displays information about the wireless connection.
Figure 5-33 Wireless Status Window
The
Wireless Status window contains the following options. Select the option to display the option window.
• Signal Strength - provides information about the connection status of the current wireless profile.
• Current Profile - displays basic information about the current profile and connection settings.
• IPv4 Status - displays the current IP address, subnet, and other IP related information assigned to the
wearable terminal.
• Wireless Log - displays a log of important recent activity, such as authentication, association, and DHCP
renewal completion, in time order.
• Versions - displays software, firmware, and hardware version numbers.
• Quit - exits the Wireless Status window.
Signal Strength Window
The Signal Strength window provides information about the connection status of the current wireless profile
including signal quality, missed beacons, and transmit retry statistics. The BSSID address (shown as AP MAC
Address) displays the AP currently associated with the connection. In Ad-Hoc mode, the AP MAC Address shows
the BSSID of the Ad-Hoc network. Information in this window updates every 2 seconds.
To open the
Signal Status window, press 1.