5 - 8 WT4070/90 Wearable Terminal Integrator Guide
Figure 5-6
Authentication Dialog Box
Tunneled Authentication
Use the Tunneled Authentication dialog box to select the tunneled authentication options. There are different
selections available for PEAP or TTLS authentication.
Figure 5-7
Tunneled Authentication Dialog Box
To select a tunneled authentication type:
1. Use the navigation keys to select a tunneled authentication type from the drop-down list. See Table 5-7 and
Table 5-8.
If you selected the TLS tunnel type that requires a user certificate, the check box is already selected.
2. Press TAB.
3. Press ALT > BKSP (SPACE) to select the User Certificate check box if a certificate is required.
4. Press TAB to highlight the Next button.
Table 5-6
Authentication Options
Authentication Description
None Default setting when authentication is not required on the network.
TLS (Fusion 2.4)
EAP-TLS (Fusion 2.5)
Select this option to enable EAP-TLS authentication. EAP-TLS is an authentication
scheme through IEEE 802.1x. It authenticates users and ensures only valid users
can connect to the network. It also restricts unauthorized users from accessing
transmitted information by using secure authentication certificates.
PEAP Select this option to enable PEAP authentication. This method uses a digital
certificate to verify and authenticate a user's identity.
LEAP Select this option to enable LEAP authentication, which is based on mutual
authentication. The AP and the connecting wearable terminal require authentication
before gaining access to the network.
TTLS Select this option to enable TTLS authentication.
To Next Page
Loading...
