Accessories 2 - 19
Placing a Battery in the Charger
When placing a spare battery into the Four Slot Spare Battery Charger, ensure proper orientation of the battery.
Figure 2-18
Inserting a Battery into the Battery Charger
Mounting Multiple Brackets
When installing multiple brackets on a wall:
•
Each mounting bracket must be 25.4 cm (10 in.) from the top of one bracket to the top of the next bracket.
•
The bottom of the last bracket must be at least 61 cm (24 in.) from the floor.
•
When mounting brackets next to each other the tabs must at least touch each other to ensure minimum
distance between brackets.
To Next Page
Loading...
