Motorola WT4070 - Wearable Terminal Setup; Setting up an Activesync Connection on the Host Computer

3 - 2 WT4070/90 Wearable Terminal Integrator Guide
Wearable Terminal Setup
The wearable terminal is set by default to communicate using a USB connection. Chapter 2, Accessories provides
the accessory setup and cable connection information for use with the wearable terminal. The wearable terminal
communication settings must be set to match the communication settings used with ActiveSync.
Setting Up an ActiveSync Connection on the Host Computer
To start ActiveSync:
1. Select Start > Programs > Microsoft ActiveSync on the host computer. The ActiveSync Window displays.
Figure 3-1 ActiveSync Window
2. In the ActiveSync window, select File > Connection Settings. The Connection Settings window appears.
NOTE Microsoft recommends installing ActiveSync on the host computer before connecting the wearable
terminal.
NOTE The normal function of the product may be disturbed by Strong Electro Magnetic Interference (for example,
static electricity). If so, simply remove and re-insert the terminal to resume normal operation. In case the
function does not resume, please use the product in another location.
NOTE Assign each wearable terminal a unique device name. Do not try to synchronize more than one wearable
terminal to the same name.