2 - 8 WT4070/90 Wearable Terminal Integrator Guide
Figure 2-6
Daisychaining Four Slot Ethernet Cradles
Ethernet Cradle Drivers
The Ethernet cradle drivers are pre-installed on the wearable terminal and initiate automatically when the wearable
terminal is placed in a properly connected Four Slot Ethernet cradle. When the wearable terminal is inserted into
the Four Slot Ethernet cradle, the LAN icon appears in the Windows CE 5.0 desktop taskbar and indicates that the
wearable terminal is connected to a network.
To view the IP Address assigned to the wearable terminal open a
Command Prompt window and enter ipconfig.
Press
CTRL > ESC.
Ethernet Port 1
Ethernet Port 2
Link LEDSpeed LED
1
st
Cradle
2
nd
Cradle
Ethernet Cable
NOTE The device’s IP address can only be viewed on the WT4070/90.
To Next Page
Loading...
