CA Series User’s Manual Serial Programming Tools
4-4
PComm Terminal Emulator
PComm Terminal Emulator can be used to connect to a serial port to verify that data transmission
is functioning correctly. It supports multiple windows and both VT100 and ANSI terminal types.
You can interactively transfer data, periodically send patterns, and transfer files using ASCII,
XMODEM, YMODEM, ZMODEM, and KERMIT protocols.
To run PComm Terminal Emulator, go to Start Æ Program Æ PComm Lite Æ Terminal
Emulator.
To Next Page
Loading...
