Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
PTP Settings
Operation
Globally disables or enables IEEE 1588 operation.
Clock Mode (sets the switch’s clock mode)
Operates as an IEEE 1588 v1 boundary clock.
v1 BC
v2 E2E 2-step TC
Operates as an edge-to-edge IEEE 1588 v2 transparent clock
with 2-step method.
v2 P2P 2-step TC
Operates as a peer-to-peer IEEE 1588 v2 transparent clock
with 2-step method.
Operates as an edge-to-edge IEEE 1588 v2 boundary clock
Operates as a peer-to-peer IEEE 1588 v2 boundary clock
SyncInterval (sets the synchronization message time interval)
0, 1, 2, 3, or 4
0 (1 s), 1 (2 s), 2 (4 s), 3 (8 s), or 4 (16 s). Supported by
IEEE 1588 V1.
0
-3, -2, -1, 0, or 1
-3 (128 ms), -2 (256 ms), -1 (512 ms), 0 (1 s), or 1 (2 s).
Supported in IEEE 1588 V2.
Delay-request Minimum Interval
Minimum delay request message interval
Domain
_DFLT (0), _ALT(1),
_ALT(2), or _ALT(3)
Subdomain name (IEEE 1588-2002) or the domain Number
(IEEE 1588-2008) f ields in PTP messages
0(def ault domain)
Transport mode
IPv4 or 802.3/Ethernet
IEEE 1588 PTP V1 supports IPv4 only
IEEE 1588 PTP V2 supports both IPv4 and IPv6.
IPv4
To Next Page
Loading...
Need help?
General
