To Next PageTo Next Page
Need help?Do you have a question about the Moxa Technologies IKS-G6524A and is the answer not in the manual?
General| Model | IKS-G6524A |
|---|---|
| Product Type | Industrial Ethernet Switch |
| Ports | 24 |
| Uplink Ports | 4 |
| SFP Slots | 4 |
| Switch Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame Support | Up to 9216 bytes |
| Power Input | 12 to 48 VDC, redundant dual inputs |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Mounting | DIN-Rail, Wall mounting |
| Managed | Yes |
| Layer | Layer 2 |
| Series | IKS |
| Redundancy | RSTP, MSTP |
| Certifications | CE, FCC, UL |
Details how to configure the switch using a USB console connection.
Explains how to configure the switch via network using the CLI.
Describes accessing and configuring the switch using a web browser interface.
Details common settings for maintaining and controlling the Moxa switch.
Configuration of IPv4 and IPv6 parameters for network management.
Configure IP address, subnet mask, and default gateway.
Configuration for sending email alerts for events and system notifications.
Procedures for updating the switch's firmware from various sources.
Manages overall PoE power output and system power budget.
Configures power settings, output mode, and allocation for each PoE port.
Explains VLANs as logical network segments for better management.
Highlights advantages like device relocation, security, and traffic control.
Configuration options for 802.1Q VLANs using Quick Setting and VLAN ID table.
Controls port access, speed, flow control, and MDI/MDIX.
Prioritizes time-sensitive data for smooth transfer and minimal delay.
Classifies traffic based on CoS values into priority queues (Weight Fair/Strict).
Configures management access via HTTP, HTTPS, Telnet, SSH, SNMP.
Selects between Static Port Lock and MAC Address Sticky modes.
Adds or modifies access control profiles and their parameters.
Enables DHCP broadcast messages to be sent over routers.
