Moxa Technologies IKS-G6524A User Manual

Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
20
Date and Time
The Moxa switch has a time calibration f unction based on information f rom an NTP server or user specified
time and date, allowing f unctions such as automatic warning emails to include a time and date stamp.
NOTE
The user must update the Current Time and Current Date af ter powering of f the switch f or a long period of
time (f or example a f ew days). The user must pay particular attention to this when there is no NTP server,
LAN, or Internet connection.
System Up Time
Indicates how long the Moxa switch has been up and running since the last cold start.
Current Time
Setting
Description
Factory Default
User-specif ied time
Indicates time in yyyy-mm-dd f ormat.
None
Time Zone
Setting Description Factory Default
Time zone
Specifies the time zone, which is used to determine the local
time offset from GMT (Greenwich Mean Time).
GMT (Greenwich
Mean Time)
Daylight Saving Time
The Daylight Saving Time settings are used to automatically set the Moxa switch’s time ahead according to
national standards.
Start Date
Setting
Description
Factory Default
User-specified date
Specif ies the date that Daylight Saving Time begins.
None
End Date
Setting
Description
Factory Default
User-specified date Specif ies the date that Daylight Saving Time ends. None
Offset
Setting
Description
Factory Default
User-specif ied hour
Specifies the number of hours that the time should be set
f orward during Daylight Saving Time.
None
Clock Source
Setting
Description
Factory Default
Local Conf igure clock source f rom local time
Local
NTP
Configure clock source from NTP
SNTP
Configure clock source from SNTP

Moxa Technologies IKS-G6524A Specifications

General

Brand	Moxa Technologies
Model	IKS-G6524A
Category	Switch
Language	English