Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
NOTE
By def ault, the password assigned to the Moxa switch is moxa. Be sure to change the def ault password
af ter you f irst log in to help keep your system secure.
3. After logging in, you may need to wait a few moments for the web console to appear. Use the folders in
the lef t navigation panel to navigate between diff erent pages of conf iguration options.
Disabling Telnet and Browser Access
If you are connecting the Moxa switch to a public network but do not intend to manage it over the network,
we suggest disabling both the Telnet and web consoles. This is done f rom the USB console by navigating to
System Identification under Basic Settings > System Information. Disable or enable the Telnet
Console and Web Configuration as shown below:
To Next Page
Loading...
