Moxa Technologies IKS-G6524A User Manual

Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
102
SNMP
The Moxa switch supports SNMP V1, V2c, and V3. SNMP V1 and SNMP V2c use a community string match
for authentication, which means that SNMP servers access all objects with read-only or read/write
permissions using the community strings public and private by def ault. SNMP V3 requires that you select an
authentication level of MD5 or SHA, and is the most secure protocol. You can also enable data encryption to
enhance data security.
Supported SNMP security modes and levels are shown in the following table. Select the security mode and
level that will be used to communicate between the SNMP agent and manager.
Protocol
Version
UI Setting Authentication Encryption Method
SNMP V1,
V2c
V1, V2c Read
Community
Community string No
Uses a community string match for
authentication.
V1, V2c
Write/Read
Community
Community string No
Uses a community string match for
authentication.
SNMP V3
No-Auth No No
Uses an account with admin or user to access
objects
MD5 or SHA
Authentication
based on MD5 or
SHA
No
Provides authentication based on HMAC-MD5,
or HMAC-SHA algorithms. 8-character
passwords are the minimum requirement f or
authentication.
MD5 or SHA
Authentication
based on MD5 or
SHA
Data
encryption
key
Provides authentication based on HMAC-MD5
or HMAC-SHA algorithms, and data encryption
key. 8-character passwords and a data
encryption key are the minimum requirements
f or authentication .and encryption.
NOTE
The username and password of SNMP V3 are the same as the username and password of User Account.
Accounts with admin privilege have read/write access to all configuration parameters. Accounts with user
authority only have read access to conf iguration parameters.
These parameters are configured on the SNMP page. A more detailed explanation of each parameter is
given below the figure.

Moxa Technologies IKS-G6524A Specifications

General

Brand	Moxa Technologies
Model	IKS-G6524A
Category	Switch
Language	English