Moxa Managed Ethernet Switch (UI_2.0_FW_5.x) User Manual
VLAN Name Setting
Name
The VLAN name can only include these characters, a-z/A-Z/0-
Null
QinQ Settings
NOTE
Moxa’s layer 3 switches support the IEEE 802.1ad QinQ f unction, which allows users to tag double VLAN
headers into a single Ethernet f rame.
TPID
Assign the TPID of the second VLAN tag
QinQ Enable
Enable VLAN QinQ f unction
VLAN Table
Use the 802.1Q VLAN table to review the VLAN groups that were created, VLAN Name, Joined Access
Ports, Trunk Ports, and Hybrid Ports, and use the Port-based VLAN table to review the VLAN groups
and Joined Ports.
To Next Page
Loading...
Need help?
General
