Moxa Technologies MGate 5105-MB-EIP Series - Page 23

MGate 5105-MB-EIP Series User Manual
23
Parameters
Value
Default
Description
Password
Password
QoS
0 to 2
Global QoS
Enable clean session
Disable
Enable
Disable
Enable/Disable MQTT clean
session
Enable retain message
Disable
Enable
Disable
Enable/Disable MQTT retain
message
Keep alive (1 to 65535 s) 60
Enable/Disable MQTT Keep
alive setting for configuring
idle time
Parameters
Value
Default
Description
Enable will retain message
Disable/Enable/As General
Topic Setting
Disable
Enable/Disable MQTT will
retain the message function
Will message
Will message content, such
as “Device A is Lost!”
Will message topic
(Empty for disable will
message)
The will message topic
subscribed by remote MQTT
client
Will message QoS
0/1/2/As General Topic
Setting
0~2: Assign QoS
Or the same as Global QoS
Parameters
Value
Description
Enable TLS
Disable/TLS v1.0/TLS
v1.1/TLS v1.2
Enable/Disable TLS encryption
CA certificate
document format : *.pem
Import/Delete CA certificate
Delete CA certificate
Client certificate
Import/Delete Client certificate
Client private key
Import/Delete Client private key
Parameters
Value
Default
Description
Buffering on SD card Disable/Enable Disable
Enable/ Disable
Data storage function on SD
card lost under IoT
connection.
Buffer size (0 to 2,048 MB) 128
The maximum capacity of
data storage. The instructed
value listed would vary,
depending on the size of the
inserted microSD card. If the
value shows 0 - 0 MB, it
means that a microSD card
is not inserted.
Buffer overflow
Overwrite the oldest
Message/Stop buffering
Overwrite the oldest
message
Data deleting mechanisms
while reaching maximum
capacity of data storage:
Overwrite the oldest data
when storage is full.
Stop updating data when
storage is full.
Cyclic sending intervals (50 to 60000 ms) 300
The frequency of uploading
data to the cloud when the
IoT connection has been
recovered.