Moxa Technologies MGate 5105-MB-EIP Series - Page 24

MGate 5105-MB-EIP Series User Manual
24
Parameters
Value
Default
Description
Tag status timeout
(0 to 3660 s; 0 for
disable)
0
Timeout duration without
receiving MB/EIP data, such
as device lost connection.
As a MQTT client, it can publish or subscribe messages. By clicking the Add button, the Message Settings
page will be directed to add up the details of the message. Within the Message Settings, the module and tag
can be added up. Additionally, two types of message can be added: publish messages and subscribe
messages.
The instructions below show the settings for adding published messages.
Parameters
Value
Description
Publish fieldbus IO data topic
The topic of published IO data
QoS
0/1/2/ As general topic
setting
Global QoS of the topic
Retain message
Disable/Enable/ As
general topic setting
MQTT retain message of the topic
Parameters
Value
Default
Description
Cyclic sending intervals
(1000 to 86400000 ms,
0 for disable)
0
Enable/Disable the sending
interval of cyclic messages
Tag changes
Apply to all tags/Specify
individual tag settings
Specify
individual tag
settings
Send tag messages under change
of value