GB
Description MSA
24 AirGo
2.3.5.4. Option – ICU/ICS – Integrated Control Unit (with or without key)
Fig. 15 Integrated Control Unit ICU
1 Connector for high pressure line
2 Pressure gauge
3 RESET Button
4 ALARM Button
5 LCD Display
The integrated control unit serves to monitor the normal function of the
compressed air breathing apparatus, the display of the compressed air data and
the display and signalisation of alarm conditions. The ICU replaces the normal
pressure gauge.
It is also equipped with a movement sensor and with the facility for initiating an
alarm manually.
In the case of the keyed option ICU-S, the key is lodged with the incident
command for identification purposes.
Further information concerning the ICU can be taken from the
ICU Operating Manual.
2.3.5.5. Option – C3 – with Coupling System alphaCLICK 2
For further information concerning the alphaCLICK 2 please refer to
Section 2.3.4.3.
2.3.5.6. Option – M – with alphaMITTER (short distance transmitter)
For further information concerning the alphaMITTER please refer to
Section 2.3.4.4.
5
1