MSA AirGo - Changing the Holder for Mask;Helmet Combination; Removing the Rescue Grip

GB
MSA Maintenance and Care
AirGo 49
4.4.3. Changing the Holder for Mask/Helmet Combination
Fig. 37 Premium harness with holder
for mask/helmet combination
Fig. 38 Premium harness with holder
for mask/helmet combination
1 Holder for mask/helmet Combination
left
1 Holder for mask/helmet Combination
right
(1) Loosen the buckle of the holder for mask/helmet combination.
(2) Pull out the holder for mask/helmet combination.
(3) Assemble in reverse order.
4.4.4. Removing the Rescue Grip
Fig. 39 Rescue grip
1 Rescue grip
2 Back plate
1
1
1
2