Operation
ALTAIR 4X
28
GB
Calibration Values
The preset calibration values for installed and activated sensors
display.
Time and Date
The date displays in a month, day and year format.
NOTE: In the event that the battery is fully discharged, the time and
date reset. At startup, the user is prompted to enter the time and
date.
If the time and date information is missing, they are reset to
[Jan-01-2008] with time stamp [00:00].
Last CAL Date and CAL Due
NOTE: These display options can be set by MSA Link software. If
these options are not set, these screens are not displayed.
- By default Last Cal is activated.
- By default Cal Due is deactivated.
Fresh Air Setup [FAS]
The FAS screen is prompted.
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 - www.fasit.it
- info@fasit.it
To Next Page
Loading...
