GB
MSA DECLARATION OF CONFORMITY
ALTAIR 5 - Operating Manual 3
Declaration of Conformity
MANUFACTURED BY:
Mine Safety Appliances Company
1000 Cranberry Woods Drive
Cranberry Township, PA 16066 USA
The manufacturer or the European Authorized Representative
MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin
declares that the product: MSA ALTAIR 5
Complies with the provisions of the council directive 94/9/EC (ATEX).
This declaration is based on the EC-Type Examination Certificate
FTZU 08 ATEX 0340 X
in accordance with Annex III of the ATEX Directive 94/9/EC.
Quality Assurance Notification issued by Ineris of France, Notified Body number
0080, in accordance with Annex IV of the ATEX Directive 94/9/EC.
We additionally declare that this product is in conformance with the EMC Directive
2004 / 108/ EC in accordance with the standards
DIN EN 50270: 2007 Typ 2, DIN EN 61000 - 6 - 3 :2007
MSA AUER GmbH
Dr. Axel Schubert
R & D Instruments
Berlin, April 2009
To Next Page
Loading...
