MSA Ultima Series User Manual

Figure 2-3. Calibration Kit 54 Contents
(Your Kit may also include one or two gas cylinders)
NOTE: Item 5 (P/N 10066581) is used
only for SAFEMTX Calibration
Item 4 - Desiccant
(P/N 10064306)
Item 5 - Calibration Cover
Assembly (P/N 10066581)
Item 2 - Zero Cap
(P/N 710535)
Item 3 - 1.5 LPM Flow
Regulator (P/N 478358)
Item 1 - Tubing (P/N 711112)
- 3/16" side connects to Item 2
- 1/4" side connects to sensor
2-6

MSA Ultima Series Specifications

General

Display	LCD with backlight
Communication Ports	RS-485, Modbus RTU
Measurement Range	Depends on sensor connected
Accuracy	Depends on sensor connected
Outputs	relays
Certifications	UL