EC Declaration of Conformity
ULTIMA X
®
Series
4
GB
EC Declaration of Conformity
Manufactured by: Mine Safety Appliances Company
1000 Cranberry Woods Drive
Cranberry Township, PA 16066 USA
The manufacturer or the European Authorized Representative:
MSA AUER GmbH, Thiemannstrasse 1, D-12059 Berlin
declares that the
product ULTIMA SENSOR XE
based on the EC-Type Examination Certificate: DMT 02 ATEX E 202 X
complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notification
complying with Annex IV of the ATEX Directive 94/9/EC has been issued by
Ineris of France, Notified Body number: 0080.
The product is in conformance with the EMC directive 2004/108/EC,
EN 50270:2006 Type 2, EN 61000-6-4:2007
The product complies with the directive 96/98/EC (MarED),
based on the EC-Type Examination Certificate: SEE BG 213.038
The quality survaillance is under the control of SEE BG, Notified Body number: 0736
MSA AUER GmbH
Dr. Axel Schubert
R&D Instruments
Berlin, October 2008
To Next Page
Loading...
