MST Impact NS5004 User Manual

NS50 wireless network switch
User Manual
Revision C
Appendix F: Connecting a PC to an IMPACT
Network Device
© 2012 MST Global
Commercial in Confidence
114
Appendix F: Connecting a PC to an IMPACT Network
Device
1. This Appendix specifies how to set up a PC connection (with Windows XP operating system)
to connect to an IMPACT NS50 or WAP.
2. Connect a PC to the device's Ethernet port with an Ethernet cable. If the PC is already part
of the network, note its TCP/IP configuration settings.
3. Click Start > Control Panel. Open Network Connections.
4. Right-click Local Area Connection and select Properties. The Local Area Connection
Properties window will open

MST Impact NS5004 Specifications

General

Brand	MST
Model	Impact NS5004
Category	Switch
Language	English