To enable MAC address filtering:
1. Click on the Enable MAC Address Filter check box to view settings.
2. Under Filter Settings, select the Mode from the drop-down box to only allow or only
deny listed machines.
3. Click on check boxes to enable Filter Wireless Clients and/or Filter Wired Clients.
4. Under Add MAC Address, click on the Enable check box.
5. Enter the MAC address of client device in the MAC Address field. Click Copy Your PC's
MAC Address to add your own computer to the list.
6. Enter Computer Name in the supplied field and click Save. The MAC address will appear in
the MAC Address List.
7. To delete the device from the list, click on the icon.
8. To edit a device in the list, click on the icon.
9. Click Save Settings.
5.5.11 Defining VLANs
The VLAN LIST screen displays VLANs and the priority that will be assigned to traffic on each VLAN. For
more information, see Understanding VLANs on page 35.