NS50 wireless network switch
User Manual
Revision C
Chapter 5: Configuration Using the Web Interface
Amount of time in minutes before a
client device is required to
re-authenticate.
Setting is at 120 minutes by
default.
IP address of the authentication
server.
This is specific to each site.
Port number used by the access
point to connect to the
authentication server.
By default the port number is 1812.
RADIUS server Shared Secret
Password used by the access point
to access the RADIUS server.
Password that matches with the
authentication server.
MAC Address Authentication
Access to the RADIUS server by
confirmation of the client device's
MAC address.
If selected, the user must always
use the same device when
connecting to the wireless network.
A second RADIUS server can be configured if the primary server is not available or not responding. This
can be configured by clicking on the Advanced button.
To Next Page
Loading...
Need help?
General
