Edit Parameters - Individual parameters can be selected and modified, or ignored, for each template
by clicking this link to open the Parameters dialogue box (See Edit Parameters section below).
Editing Parameters
In the Parameters dialog box, search for the desired parameter by typing all or part of any of the displayed
column values:
Managed: To manage a parameter, tick the checkbox in this column. Fixed entries cannot be disabled
or changed, while required entries can be edited but not disabled. Unmarked entries can be disabled
by unticking the checkbox.
Parameter Name: For more information on parameters that affect a specific AP model on the network,
see the TFTP Parameters section of the user manual for that model.
Parameter Value: To edit a parameter, click on the parameter value and either enter a new value (e.g.
names and IP addresses) or select a new value from the dropdown menu (e.g. ENABLED / DISABLED).
When all required changes have been made, click OK to close the dialog box. The Managed status of
all available parameters can be changed at once using the Manage All and Manage None checkboxes
below the list.