MTS Systems Ultimate TV - How to Change Single Recording Settings; How to Record a Series; How to Change Series Recording Settings

14
How to change single recording settings
• Press RECORDED TV
• Use the ARROW buttons to highlight the program recording
(indicated by a red dot)
• Press OK. The recording info page appears
• Highlight RECORD SETTINGS, and press OK. The Record Settings
screen appears
• Use the ARROW buttons to highlight the text under STOP
RECORDING, and press OK
• Highlight one of the following options, and press OK
• At Scheduled Time
• 5 Minutes After
• 15 Minutes After
• 30 Minutes After
• 1 Hour After
• 2 Hours After
• 3 Hours After
Or, highlight DON’T CHANGE and press OK to keep your current setting
• Highlight text under KEEP UNTIL, and press OK
• Highlight one of the following options, and press OK
• SPACE NEEDED – Automatically erases the program when space is needed for a new recording. The oldest
recording will be the fi rst to be erased if space is needed
• I ERASE – Stores the program until it is erased manually
Or, highlight DON’T CHANGE and press OK to keep current setting
• Use the ARROW buttons to highlight SAVE CHANGES, and press OK
• RECORDING UPDATED message appears for a few seconds
• Highlight WATCH and press OK, to return to Live TV
How to record a series
Record recurring programs, such as episodes in a series. Once scheduled, a series recording occurs until
cancelled. Scheduled recordings continue even when the TV and receiver are off .
• While watching live TV, press RECORD twice to record the series you are currently watching
• You can also go into the GUIDE, highlight the name of the series you want to record, and press RECORD twice
• One-touch recording defaults to a weekly series recording
How to change series recording settings
• Press RECORDED TV
• Use the RIGHT ARROW to highlight SERIES
• Highlight the series name and press OK. The Series Info screen
appears
• The following can be changed, TIME, SHOW TYPE, and STOP
RECORDING
• Use the ARROW buttons to highlight selection and press OK
• TIME
– Any day, around HH:MM AM/PM
– Any day, anytime
– Any day, anytime, once per day
• SHOW TYPE
– First Run & Rerun
– First Run Only