MTS Systems Ultimate TV - How to Record Manually; How to Check the Program is Recording

15
• STOP RECORDING
– At Scheduled Time
– 5 Minutes After
– 15 Minutes After
– 30 Minutes After
– 1 Hour After
– 2 Hours After
– 3 Hours After
• Highlight your choice and press OK
• When choices have been selected, highlight SAVE CHANGES and press OK
• The Series info screen appears. Press EXIT to return to Live TV
How to record manually
Use this feature if you want to override the info in the Guide and record for a specifi c amount of time. Schedule a
recording manually by specifying the channel, date, time, and duration. This feature can only be used for single
programs (not series).
How to Create a Manual Recording:
• Press RECORDED TV
• RIGHT ARROW to highlight ADD RECORDING
• Highlight CHANNEL AND TIME, and press OK. The Manual Record screen appears
• Highlight the text entry box under CHANNEL. Use the NUMERIC KEYPAD to enter the channel to record
• Highlight the text entry box under DATE, and press OK. Highlight the date you want, press OK
• DOWN ARROW to highlight MON/DATE | CHANGE under DATE and press OK to change the recording date
• Highlight the text entry box under START. Use the NUMERIC KEYPAD to enter the time to start recording. RIGHT
ARROW and press OK to change to AM or PM
• Highlight the text entry box under STOP. Use the NUMERIC KEYPAD to enter the time to stop recording. RIGHT
ARROW and press OK to change to AM or PM
• To set how long the recording is to be stored, highlight the text under KEEP UNTIL, and press OK
Highlight one of the following options and press OK
• SPACE NEEDED – Automatically erases the program when space is needed for a new recording. The oldest
recording will be the fi rst to be erased if space is needed
• I ERASE – Stores the program until it is manually erased
• Highlight RECORD and press OK. Or, highlight DON’T RECORD and press OK to cancel the recording
• The message “Recording Scheduled” appears for a few seconds
• Press EXIT to return to Live TV
How to check the program is recording
• When a program is recording the red light under RECORD will be seen on the receiver
• In the Guide, individually scheduled recordings are marked by a red dot and series recordings are marked by
three overlapping dots
• Scheduled recordings continue even when the TV and receiver are off
• Press RECORDED TV. This screen displays the title of a recorded program with a red dot as soon as it begins
recording. Scroll to SCHEDULED to see programs that will be recorded
LINK HD RECORD