MTU 16 V 4000 C21 - Page 58

Flashi
ng
code
PID SID FMI Description Maintenance tasks
43 111 1 Coolant level too low. 1. Check coolant level, top up if
required (→ Page 112).
2. Contact Service.
44 52 0 Intercooler coolant temper‐
ature too high.
1. Check coolant condition
(→ Page 119).
2. Check coolant level, top up if
required (→ Page 120).
3. Check intercooler for contam‐
ination.
4. Contact Service.
44 105 0 Inlet elbow temperature too
high.
1. Check contamination indica‐
tor signal ring position
(→ Page 102).
2. Contact Service.
44 110 0 Coolant temperature too
high.
1. Check coolant condition
(→ Page 119).
2. Check coolant level, top up if
required (→ Page 112).
3. Check cooler for dirt.
4. Contact Service.
44 172 0 Air inlet temperature too
high.
1. Check contamination indica‐
tor signal ring position
(→ Page 102).
2. Contact Service.
44 175 0 Oil temperature too high. 1. Check engine oil level
(→ Page 103).
2. Contact Service.
105 14 Inlet elbow temperature:
power reduction.
1. Check contamination indica‐
tor signal ring position
(→ Page 102).
2. Contact Service.
110 14 Coolant temperature: power
reduction.
1. Check coolant condition
(→ Page 119).
2. Check coolant level, top up if
required (→ Page 112).
3. Check cooler for dirt.
4. Contact Service.
45 19 1 High range: Oil pressure
too low.
1. Check engine oil level
(→ Page 103).
2. Contact Service.
45 100 1 Oil pressure too low. 1. Check engine oil level
(→ Page 103).
2. Contact Service.
58 | Troubleshooting | MS150049/02E 2012-11
TIM-ID: 0000003162 - 002