8.6.2 Injector – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Puller
3555890163/00 1
Fuel suction device
F30378207 1
Torque wrench, 20-100 Nm
F30026582 1
Ratchet adapter
F30027340 1
Open-end wrench bit
F30025897 1
Spider patch spanner
F30027425 1
Spider patch spanner
F30027424 1
Double-head box wrench
F30011450 1
Ratchet adapter
F30027340 1
Assembly compound (Kluthe Hakuform 30-15)
X00067260 1
Sealing ring
(→ Spare Parts Catalog)
Sealing ring
(→ Spare Parts Catalog)
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
Preparatory steps
1. Remove cylinder head cover (→ Page 76).
2. Drain fuel (→ Page 87).
82 | Task Description | MW15409/04E 2015-08
TIM-ID: 0000004646 - 008
To Next Page
Loading...
