About these Operating Instructions
Who should read these instructions?
2
About these Operating Instructions
Who should read these instructions?
These instructions are intended for operators of orchard or vineyard sprayers equipped with a job
computer from Müller-Elektronik.
The instructions will show you:
▪ The meaning of the icons on the screen;
▪ Where to find the settings that are relevant for a function in the application;
▪ How to configure the application;
▪ How to calibrate components that need to be calibrated.
The instructions do not explain how to operate the orchard or vineyard sprayer. It is not a substitute
for the orchard/vineyard sprayer manufacturer's instruction manual.
Directional information in these instructions
All directional information in these instructions, such as “left”, “right”, “forward”, “back”, is relative to
the movement direction of the vehicle.
Layout of operating instructions
The operating instructions explain step by step how you can perform certain operations with the
product.
We use the following symbols throughout these Operating Instructions to identify different operating
instructions:
1.
Actions that must be performed in succession.
Result of the action.
This will happen when you perform an action.
Result of an operating instruction.
This will happen when you have completed all
Requirements.
In the event that any requirements have been
specified, these must be met before an action
To Next Page
Loading...
Need help?
General
