5
Basic control principles
Layout of work screen
Icons beside the implement image
Functions
Sections are switched via SECTION-Control.
The SECTION-Control application has closed all sections.
Examples for the cause:
▪ The sprayer is outside of the field boundary or in an area that has
already been worked
▪ Sprayer on the headland
Other causes are also possible.
Beacon is switched on.
The working lights are switched on.
Left fan switched on.
Middle fan switched on.
Right fan switched on.
Air compressor switched off.
Air compressor switched on.
Boom height sensor activated.
If a boom height sensor is activated, the air cushions and fans cannot be
The oil level is too low.
The chassis settings are activated.
Sliding axle is being extended.
To Next Page
Loading...